applikasjoner, DIY-magnetapplikasjoner
Vindbeskyttelse for hund
Vinteren er her igjen – Og igjen er det å fryse kaldt ute. “Rav”, Min tyske Shepard, har henne “seng” på bunnen av utvendig trapp. Jeg må barrikadere inngangsporten min hver vinter for å sikre at hun ikke blir for kald. I fjor prøvde jeg en trekonstruksjon, but that was neither visually appealing nor windproof.
This year I built a wooden frame for the gate and attached an acetate pane for wind protection. To make sure it stays on tightly and is still easy to remove I used super magnets.
After building the frame I drilled 5 mm deep holes with a diameter of 8 mm into the wooden frame. Due to the drill bit the holes were slightly deeper than 5 mm, so had a little more room for the adhesive.
The new frame fits perfectly on the iron bars of the gate and protects “Rav” from even strong winds. The tenant seems very pleased with the result (see picture at the bottom)!
